Search vulnerabilities

Results 1,979

Export CSV
CVE-2026-121809

CPU exhaustion via a truncated gRPC message on streaming RPCs in elixir-grpc grpc_server

Loop with Unreachable Exit Condition ('Infinite Loop') vulnerability in elixir-grpc grpc_server and grpc allows unauthenticated attackers to occupy a BEAM scheduler indefinitely via a client-streaming or bidirectional-streaming request whose body ends inside a gRPC message. GRPC.Server.Adapters.Cowboy.read_stream/1 (grpc_server/lib/grpc/server/adapters/cowboy.ex, and the Cowboy adapter in grpc before the package split) asks for more data whenever the buffer does not hold a complete message. Once the request body has ended, every further read returns an empty chunk, so the buffer never changes and the function retries without end. A single 5-byte length prefix sent with END_STREAM keeps one scheduler busy for as long as the connection stays open, and repeated requests exhaust all schedulers. This issue affects grpc: from 0.3.1 before 1.0.0; grpc_server: from 1.0.0 before 1.1.0.

CVSS 4.0 · 8.2 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-76414

A vulnerability in Microsoft Compiled HTML Help (CHM) file scanning of ClamAV could allow an unauthenticated, remote attacker to cause a DoS condition on an affected device. This vulnerability is due to a logic error when scanning the CHM file and following the internal file pointers. An attacker could exploit this vulnerability by sending a crafted CHM file for scanning. A successful exploit could allow the attacker to cause the ClamAV decode process to terminate due to an infinite loop, resulting in a DoS condition on the affected software.

CVSS 3.1 · 7.5 High EPSS n/a KEV · Not listed
Vendors
Products
CVE-2026-76416

A vulnerability in the InstallShield file parser of ClamAV could allow an unauthenticated, remote attacker to cause a DoS condition on an affected device. This vulnerability is due to incomplete error checking when the InstallShield File Parser is performing a scan. An attacker could exploit this vulnerability by sending a crafted InstallShield file to be scanned. A successful exploit could allow the attacker to cause the ClamAV scanning process to terminate due to an infinite loop, resulting in a DoS condition on the affected software.

CVSS 3.1 · 7.5 High EPSS n/a KEV · Not listed
Vendors
Products
CVE-2026-131874

Gargoyle 2023.1 through 2026.1.1 Plus Interpreter Infinite Loop via ReadString()

Gargoyle 2023.1 through 2026.1.1 contains an infinite loop vulnerability in the bundled Plus interpreter's ReadString() function in terps/plus/loaddatabase.c that fails to handle end of file. Attackers can supply an empty, truncated, or crafted .plus game file that hangs Gargoyle at full CPU until the user kills it.

CVSS 4.0 · 6.8 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-118899

NGINX TLSv1.3 vulnerability

When using the listen directive with the ssl parameter in the http block with TLSv1.3 enabled, an attacker can use a specially crafted TLS connection to cause an infinite loop in the NGINX worker process while reading the HTTP request body. As a result, the worker process stops accepting new connections and processing existing connections. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated. Impact: This vulnerability allows a remote, unauthenticated attacker to cause a denial-of-service (DoS) of NGINX. There is no control plane exposure; this is a data plane issue only. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.

CVSS 4.0 · 8.7 High EPSS n/a KEV · Not listed
Vendors
F5
CVE-2026-6889

A denial-of-service vulnerability could allow an authenticated attacker to modify the parameters of the product and cause the device to enter an indefinite restart loop, requiring a manual restart to resolve.

CVSS 4.0 · 6.9 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-129248

Akaunting Invoice Item Validation helpers.php calculation_to_quantity numeric range comparison without minimum check

A weakness has been identified in Akaunting up to 3.3.0. The affected element is the function calculation_to_quantity of the file helpers.php of the component Invoice Item Validation. Executing a manipulation of the argument quantity can lead to numeric range comparison without minimum check. The attack may be performed from remote. The vendor was contacted early about this disclosure but did not respond in any way.

CVSS 4.0 · 5.3 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-128130

AIOHTTP: Pure-Python parser request replay and buffer growth behind a declined upgrade

AIOHTTP is an asynchronous HTTP client/server framework for asyncio and Python. Prior to 3.14.4, when the pipelined request queue is full, the pure-Python parser stores the unparsed remainder internally and also returns the same data to its caller. After a handler declines an upgrade request, the caller feeds the remainder back to the parser, causing the buffer to grow with each handled request and dispatching already-handled requests to the application again. The issue affects deployments using AIOHTTP_NO_EXTENSIONS or otherwise running without the standard C-extension wheel, and can cause excessive memory use and repeated request processing. This issue is fixed in version 3.14.4.

CVSS 4.0 · 8.3 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-62974

BACnet Stack: Remote unauthenticated DoS in `Life_Safety_Zone` `PROP_ZONE_MEMBERS` WriteProperty parsing

BACnet Stack is a BACnet open source protocol stack C library for embedded systems. Prior to versions 1.4.5, 1.5.1, and 1.6.0, a malformed but non-empty BACnet WriteProperty request can drive the official server demo into a non-terminating request-processing loop with repeated heap-backed side effects. This results in a remote unauthenticated denial of service via uncontrolled resource consumption and a non-terminating request path. This issue has been patched in versions 1.4.5, 1.5.1, and 1.6.0.

CVSS 4.0 · 8.7 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-98087

sched/rt,dl: Skip migrate-disabled tasks when picking a push candidate

In the Linux kernel, the following vulnerability has been resolved: sched/rt,dl: Skip migrate-disabled tasks when picking a push candidate A migrate_disable()'d RT task cannot be moved to another CPU, but the scheduler still keeps such a task on that CPU's pushable list (rq->rt.pushable_tasks) and still marks the runqueue RT-overloaded (rq->rt.overloaded = 1). So the RT balancer keeps treating this CPU as having a task to move away, and keeps trying to move the task, but the push can never succeed. When the head is pinned, push_rt_task() does not give up either. It falls back to pushing rq->curr instead, using the per-CPU stopper, as added by commit a7c81556ec4d ("sched: Fix migrate_disable() vs rt/dl balancing"). The CPU spends tens of milliseconds in this retry loop. The core is isolated for real-time work, but during the loop nearly half of its time is consumed by pushes that cannot succeed. An ftrace capture of the affected CPU, with sched_switch enabled and commit 94894c9c477e ("sched/rt: Skip currently executing CPU in rto_next_cpu()") applied, shows where the CPU time went. Two SCHED_FIFO tasks at equal priority shared the CPU, taskA migrate_disable()'d and queued, taskB as rq->curr. In one 89 ms window, taskB got only 52 ms of CPU. The other 37 ms went to the stopper thread. The scheduler kept trying to push taskA, the pinned head of the pushable list, fell back to pushing taskB instead, and woke the stopper 5204 times. Every one of those pushes failed and no task was moved. taskA stayed runnable and queued the whole time, and never ran. Pushing taskB fails on a re-check. find_lock_lowest_rq() drops the rq lock to take the target rq lock, then checks again with "task != pick_next_pushable_task(rq)". The task being pushed is taskB, but the pick returns taskA, the head of the pushable list. taskB is rq->curr, and set_next_task_rt() removes the running task from that list, so taskB can never be the head. The check expects a candidate taken from the pushable list, but the fallback pushes rq->curr, which is never on that list. So the check fails every time. .--> push-IPI arrives | | | v | pushable head = taskA -> pinned, cannot be pushed | | | v | so push taskB instead -> wake migration/N, a stop-class | | thread, so it preempts taskB | v | re-check compares taskB against the pushable head, | which is still taskA -> give up | | | v | nothing moved, taskA still queued, rq still overloaded | | '----------' repeats every ~17 us, 5204 times, for 89 ms The loop cannot stop itself. Every round leaves the runqueue exactly as it was, so the next push-IPI does the same thing. In the capture it ended only when taskB went to sleep on its own. taskA was then picked locally and left the pushable list. CPU time per task in the window, from sched_switch: taskB 51.95 ms real work migration/N 37.18 ms nothing moved taskA 0.00 ms queued the whole time, never picked idle 0.01 ms Counts over the same window: 7667 push-IPIs handled on this CPU 17481 pick_next_pushable_task() returned taskA, still pinned 5204 find_lock_lowest_rq() gave up on the re-check 1 push that actually completed 0 migrations of taskA The CPU times and the window length come from the standard sched_switch tracepoint. The counts needed tracepoints added inside the RT balancer for this investigation. The self-IPI path is closed by the rto_next_cpu() fix above, and that part works. But the runqueue is still marked overloaded, because the pinned task is still advertised as pushable. Other CPUs now send the push-IPIs during their own RT balancing, and the same loop runs again. Closing the self-IPI path did not stop a pinn ---truncated---

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-52789

BACnet Stack: Denial of Service (Infinite Loop) in handler_read_property_multiple via malformed RPM requests

BACnet Stack is a BACnet open source protocol stack C library for embedded systems. Prior to versions 1.4.5, 1.5.1, and 1.6.0, a Denial of Service (DoS) vulnerability exists in the BACnet stack's ReadPropertyMultiple (RPM) handler. When processing a malformed RPM request packet that lacks the expected closing tags, the function handler_read_property_multiple enters an infinite loop. This issue has been patched in versions 1.4.5, 1.5.1, and 1.6.0.

CVSS 3.1 · 7.5 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-64519

NFSD: Fix infinite loop in layout state revocation

In the Linux kernel, the following vulnerability has been resolved: NFSD: Fix infinite loop in layout state revocation find_one_sb_stid() skips stids whose sc_status is non-zero, but the SC_TYPE_LAYOUT case in nfsd4_revoke_states() never sets sc_status before calling nfsd4_close_layout(). The retry loop therefore finds the same layout stid on every iteration, hanging the revoker indefinitely.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-64528

tty: serial: samsung: Remove redundant port lock acquisition in rx helpers

In the Linux kernel, the following vulnerability has been resolved: tty: serial: samsung: Remove redundant port lock acquisition in rx helpers Sashiko identified a deadlock when the console flow is engaged [1]. When console flow control is enabled (UPF_CONS_FLOW), s3c24xx_serial_stop_tx() calls s3c24xx_serial_rx_enable() and s3c24xx_serial_start_tx() calls s3c24xx_serial_rx_disable(). The serial core framework invokes the .stop_tx() and .start_tx() callbacks with the port->lock spinlock already held. Furthermore, all internal driver paths that invoke stop_tx (such as the DMA TX completion handler s3c24xx_serial_tx_dma_complete() or the PIO TX IRQ handler s3c24xx_serial_tx_irq()) also acquire port->lock prior to calling it. (Note that s3c24xx_serial_start_tx() is only invoked by the serial core). However, s3c24xx_serial_rx_enable() and s3c24xx_serial_rx_disable() unconditionally attempt to acquire port->lock again using uart_port_lock_irqsave(). Since spinlocks are not recursive, this causes a deadlock on the same CPU when console flow control is engaged. Remove the redundant lock acquisition from both rx helper functions.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-64537

bridge: cfm: reject invalid CCM interval at configuration time

In the Linux kernel, the following vulnerability has been resolved: bridge: cfm: reject invalid CCM interval at configuration time ccm_tx_work_expired() re-arms itself via queue_delayed_work() using the configured exp_interval converted by interval_to_us(). When exp_interval is BR_CFM_CCM_INTERVAL_NONE or out of range, interval_to_us() returns 0, causing the worker to fire immediately in a tight loop that allocates skbs until OOM. Fix this by validating exp_interval at configuration time: - Constrain IFLA_BRIDGE_CFM_CC_CONFIG_EXP_INTERVAL to the valid range [BR_CFM_CCM_INTERVAL_3_3_MS, BR_CFM_CCM_INTERVAL_10_MIN] in the netlink policy so userspace cannot set an invalid value. - Reject starting CCM TX in br_cfm_cc_ccm_tx() when exp_interval has not yet been configured (defaults to 0 from kzalloc).

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-125275

A device certificate whose CA isn't registered can keep a TLS handshake running forever

Loop with Unreachable Exit Condition ('Infinite Loop') vulnerability in device certificate verification in nerves-hub nerves_hub_web allows an unauthenticated remote attacker to cause a denial of service via a TLS client certificate whose CA is not registered. When a client certificate chains to a root in the device endpoint's trust store but no CA in the chain is registered in NervesHub, NervesHub.SSL.decide/2 refuses it with the reason :unknown_ca. Erlang/OTP ssl reads that reason as a missing trust anchor, looks for an alternative root, finds the same root and validates again without end. The handshake process queries the database on each pass and keeps running after the client disconnects, until the node restarts. The device endpoint trusts the public roots from CAStore unless DEVICE_SSL_CACERTFILE is set, so a client certificate from a public CA whose chain allows client authentication is sufficient. A chain that ends at a root outside the trust store is refused once. This issue affects nerves_hub: from 1.0.0 before 2.5.4.

CVSS 4.0 · 8.2 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-93668

Bluetooth BR/EDR SDP server blocks the Bluetooth workqueue indefinitely when the SDP buffer pool is empty

The Bluetooth Classic SDP server in subsys/bluetooth/host/classic/sdp.c allocated every response PDU through bt_sdp_create_pdu(), which expands to bt_l2cap_create_pdu() and therefore uses a K_FOREVER timeout. The allocation is made from sdp_pool, a fixed pool holding only CONFIG_BT_MAX_CONN buffers (one in the default configuration) that is shared with the SDP client role. When the pool is empty the call blocks without a bound. The allocation is reached from bt_sdp_recv() on the Bluetooth host's RX context: the bt_workq "BT RX WQ" workqueue in the default configuration since v3.1.0, and the dedicated "BT RX" thread before that. This context processes all normal-priority HCI events and all received ACL data. The SDP L2CAP server is registered on PSM 0x0001 with no security requirement (BT_SECURITY_L0), so an unpaired, unauthenticated BR/EDR peer within radio range of a connectable device can drive it. Every malformed or unrecognised SDP PDU reaches send_err_rsp(), and the sdp_svc_search_req(), sdp_svc_att_req() and sdp_svc_search_att_req() handlers allocate as well, so a short burst of pipelined requests drains the pool and parks the RX context in the blocking allocation. A pool buffer is released only once its response has been sent, and a peer that withholds baseband acknowledgements keeps the controller's buffers for the link full, so the response is never sent. While the RX context is blocked, the entire Bluetooth host, for all connections and both LE and BR/EDR, stops processing normal-priority HCI events and received data. In most affected releases the stall is permanent. Queued PDUs are freed only by connection or channel teardown, which waits for the normal-priority Disconnection Complete handler, and that handler runs on the blocked RX context, so the host does not recover without a reset. In v3.7.0 through v4.1.x the TX processor discards the queued response once the link supervision timeout drops the connection, so each stall ends at that timeout, but the peer can reconnect and repeat it for as long as it stays in range. The impact is limited to availability; no memory corruption or information disclosure is involved. The fix adds sdp_svc_create_pdu() using K_NO_WAIT, pre-allocates the response buffer once in bt_sdp_recv(), stashes the request in sdp->recv_pending when no buffer is available, and retries it from a work handler once a buffer is freed by the pool destroy callback.

CVSS 3.1 · 6.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-93666

Bluetooth Classic SDP client can deadlock the Bluetooth workqueue on buffer allocation

The Bluetooth Classic SDP client built its outgoing request PDUs with bt_sdp_create_pdu(), which allocates from the sdp_pool net-buf pool with a K_FOREVER timeout and no failure handling, in sdp_client_ss_search(), sdp_client_sa_search() and sdp_client_ssa_search() in subsys/bluetooth/host/classic/sdp.c. All of these run on the Bluetooth workqueue bt_workq (via sdp_client_work_handler(), the L2CAP sdp_client_connected() callback, or the continuation-state follow-up from a received response), which is the same single thread that dispatches incoming HCI ACL and event traffic, drives L2CAP, and performs connection and channel teardown. sdp_pool holds only CONFIG_BT_MAX_CONN buffers (one by default) and is shared with the SDP server role. An unauthenticated peer within BR/EDR range can drive both halves of the trigger. The SDP L2CAP server is registered at BT_SECURITY_L0, so any inbound SDP request makes the device allocate the pool's buffer for a response, which is held until the controller has transmitted it. The same peer can then cause a client request to be issued while the pool is empty: in-tree profiles start SDP discovery from inbound connection callbacks (for example hfp_hf_accept() calls bt_sdp_discover() through hfp_hf_create(), and hfp_ag.c mirrors this), and a peer acting as an SDP server can force repeated client requests by answering with partial responses carrying continuation state. With the pool empty, the allocation blocks uninterruptibly and freezes the entire Bluetooth host. The stall becomes permanent when the release of the outstanding buffer itself depends on the blocked workqueue: if the link carrying the queued PDU is dropped or stalls, hci_disconn_complete() and the L2CAP channel cleanup that purges the channel TX queue are themselves bt_workq work items, so the buffer is never returned. The result is an unrecoverable denial of service of all Bluetooth functionality until reboot; there is no memory-safety, confidentiality or integrity impact. The fix allocates client PDUs with K_NO_WAIT via a new sdp_client_create_pdu(), propagates -ENOBUFS, parks the session on a new SDP_CLIENT_FLAG_WAIT_FOR_TX_BUF flag, and adds an sdp_pool destructor that re-submits the SDP client worker when a buffer becomes available. Note that the SDP server role still allocated from the same pool with K_FOREVER at this commit; that path was addressed separately.

CVSS 3.1 · 5.3 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-122096

Apache DataSketches Java: Uncontrolled resource consumption when deserializing crafted sketch images

Uncontrolled Resource Consumption vulnerability in the sketch deserialization of Apache DataSketches Java. Several deserializers trusted sizes and counts declared in the serialized input. A small crafted input could make an application allocate an excessive amount of memory, leading to an OutOfMemoryError. A crafted string passed to FrequentLongsSketch.getInstance(String) could also make deserialization, or a later update, loop indefinitely. Only applications that deserialize sketches from untrusted sources are affected. This issue affects Apache DataSketches Java: through 9.0.0. Users are recommended to upgrade to version 9.1.0, which fixes the issue.

CVSS 3.1 · 7.5 High EPSS < 1% KEV · Not listed
CVE-2026-92241

Bluetooth Classic AVRCP browsing channel can deadlock the Bluetooth receive thread, hanging the host

The AVRCP browsing channel's L2CAP receive-buffer callback, browsing_avrcp_l2cap_alloc_buf() in subsys/bluetooth/host/classic/avrcp.c, allocated from the shared avctp_browsing_rx_pool with K_FOREVER. L2CAP invokes that callback from the Bluetooth RX work queue thread (bt_workq, "BT RX WQ"), both for the head buffer of a new SDU and — through l2cap_br_alloc_frag() and net_buf_append_bytes() — for every further fragment of a reassembled SDU. That same thread is the only context that ever releases these buffers, after bt_l2cap_br_recv_seg() delivers a completed SDU and calls net_buf_unref(), so a wait taken there can never be satisfied. The pool holds CONFIG_BT_MAX_CONN + 1 buffers of CONFIG_BT_AVRCP_BROWSING_L2CAP_MTU bytes (two buffers of 339 bytes in the default configuration). A connected browsing peer can drain it because bt_l2cap_br_recv_seg() in subsys/bluetooth/host/classic/l2cap_br.c accepts the SDU length declared in an SAR_START segment without bounding it by br_chan->rx.mtu: a peer that announces a large SDU and then streams continuation segments forces one pool buffer per segment-worth of data. Once the pool is empty the next allocation blocks forever inside the callback. Triggering the flaw requires a build with CONFIG_BT_CLASSIC and the experimental CONFIG_BT_AVRCP_BROWSING option, an application that registers AVRCP callbacks, and a BR/EDR peer that has established the AVRCP control channel and then the browsing channel, which requires an encrypted (paired) link. No malformed packet is needed — a few hundred bytes of ordinary segmented L2CAP traffic suffice. The consequence is a permanent hang of the whole Bluetooth host, not just of AVRCP: the blocked thread drains bt_dev.rx_queue for all HCI ACL data and low-priority events and also runs the host's internal work items, so all connections stop being serviced and the state is unrecoverable without a reboot. There is no memory-corruption or information-disclosure component. The fix allocates with K_NO_WAIT, so an empty pool now yields a local-busy indication or a channel disconnect that the application can recover from.

CVSS 3.1 · 5.7 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-103645

Integer overflow vulnerability in QTextCodec fromUnicode() and toUnicode() impacts Qt

An integer overflow vulnerability in the Qt QTextCodec fromUnicode() and toUnicode() functionality of the Qt 5 Core Compatibility APIs module (Qt 6) and the Qt Core module (Qt 5). Only builds where Qt is compiled with ICU support are affected.

CVSS 4.0 · 1.1 Low EPSS < 1% KEV · Not listed
Vendors
Qt
Products